Lathe is a machine tool which causes workpiece to revolve so that when cutting tool comes in contact with the workpiece it removes the metal in the form of chips. Workpiece can be held securely and rigidly on the machine tool between centres or by means of chuck. To cut the material easily the cutting tool should be harder than the material of workpiece. It should be rigidly held on the machine or should be fed in a definite way relative to the workpiece.

Machining a groove or slot, often called full slotting, involves three machined faces: Slots closed at both ends are pockets, requiring end mills that can work in the axial direction Full slotting with an end mill is a demanding operation. The axial cutting depth should be generally reduced to. May 10, 2020 A slot is cut on the body of the ram for changing the position of the stroke. In some machines, special type for tool holders is provided to relieve the tool during its return stroke. Ram Drive Mechanism. A slotter removes metal during downward cutting stroke only whereas during upward return stroke no metal is removed.

Arrangements for setting the direction of tool advancement and its rigid holding, are already provided on lathe machine.

Read more : 25 Basic Operations Performed On Lathe Machine

1700w China Professional power tools/hand tools brick wall saw/stone cutting saw/groove machine M1Y-OC01-150 Specifications Model NO. Why Choose Us: 1- Have More Than 1 0 Years In Professional Power Tools; 2- Welcome Small And Big Size Customer Orders; 3- 100% QC Inspection Before Shipment. Main involved in electric tools, electric garden tools, and the main products including Circular Saw.

LATHE OPERATIONS

A standard machine is that which is able to deal with a variety of work and a wide range of operations can be performed on it. Special purpose machine is that which has been designed for specific purpose and only performs one or limited range of operations.

A centre lathe is an example of standard lathe because on this machine we can perform the following operations :

(a) Turning
(b) Facing
(c) Parting off
(d) Knurling
(e) Thread cutting
(f) Grooving
(g) Drilling
(h) Boring
(i) Reaming

These operations are described below in detail.

Turning

It is the removal of material from the outside diameter of a cylindrical job to obtain one or more finished diameter. Usually, there are three types of turning which are given below :

(a) Plain or straight or parallel turning.
(b) Stepped turning.
(c) Taper turning.

In plain turning machining is done in this way that after removal of material, finished diameter at both the ends of length remains equal.
Turning operation where the entire length is divided in steps of different diameter but each step individually finished by using plain turning is known as stepped turning. Taper turning is the operation in which the material is removed from the job to produce a conical shape. All the three types of turning are shown in Figure 7.13.

Plain Turning and Stepped Turning

In plain turning, the workpiece is turned straight throughout the entire length when it is made to rotate about the lathe axis, and the cutting tool is fed along the lathe axis. The plain or straight turning produces a cylindrical surface after machining.

In stepped turning, the workpiece is turned in such a way that throughout the turning length it forms the steps of different diameters.
After facing and centering at both ends faces, the job is mounted between the centres using a dog carrier attached to the workpiece, the bent tail of dog carrier is fitted into the slot provided on the driven plate. If the workpiece is mounted on a chuck, care should be taken to centre it accurately with the lathe axis. The trueness of the workpiece held on a chuck is tested by holding a scriber or a dial indicator against the rotating workpiece. Turning tool is clamped on the tool post by keeping its cutting edge approximately at the lathe axis or slightly above it.

Taper Turning

Generally, the following methods are used for taper turning :
(a) By swivelling compound rest
(b) By setting over the tail stock
(c) By taper turning attachment
(d) By forming or broad-nose tool
By Swivelling Compound Rest

This method is used to produce short or steep tapers. The principle of this compound rest is that axis of workpiece rotates parallel to the bed
axis and the cutting tool moves at the desired angle where the compound rest is already swivelled.

Let the swivelled angle of compound rest with lathe axis is ‘θ’. ‘ L’ shows the length, on which taper turning takes place. We can calculate the swivelled angle of compound rest in respect of lathe axis

by following formula : tan θ = ( D – d) / L

where ‘ D’ and ‘d ’ are the larger and smaller diameters respectively.

Read more ; Taper turning by using taper turning attachment | Advantages

Facing

It is the machining of the ends of a workpiece to make the ends smooth. For this operation, the cutting tool is fed perpendicular to the lathe or workpiece axis by means of cross slide.

Parting Off

This operation involves cutting the work-metal into two parts by using parting off tool. Feed to the cutting tool is given in same manner as in case of facing operation.

Knurling

It is the process of producing rough surface of embossing diamond shaped pattern on a smooth surface of a cylindrical job. Knurling provides an effective gripping surface on a job to prevent it from slipping when operated by hand. Knurling, as shown in Figure 7.14, may be of two types :
(a) straight or parallel, and
(b) diamond type.

Knurling is done by means of knurling tool which consists of a set of hardened steel rollers. The teeth are cut on the steel rollers in different pattern. For knurling operation, the knurling tool is forced with the workpiece which is already arranged in revolving condition.

Thread Cutting

In thread cutting operation, there is a certain ratio of motion between the travel of tool and the rotation of the spindle. This ratio is directly effected by the lead screw which is attached to the lathe spindle through gears. General set up for thread cutting is shown in Figure 7.15.

For cutting threads of different pitches, the stud (driver gear) and lead screw gear (driven gear) are changed as per desired ratio of revolution between the spindle and the lead screw. The ratio between the teeth on stud and lead screw gear can be calculated by the given formula,

Read More : Thread Cutting on Lathe -Lathe Machine Operations

Grooving

This operation is also denoted as necking. Usually, grooves are cut on a cylindrical surface in narrow shape by means of grooving tool. The cutting edge of grooving tool is kept narrow.

Drilling

For making a standard size of hole in a workpiece by means of drill is known as drilling operation. For this operation, drill is held in tail stock spindle.

Read More : Basic and related Drilling machine Operations

Boring

Boring is the operation of enlarging a drilled hole by means of a boring tool. The boring tool is fitted on a boring bar which is held in tail stock spindle.

Reaming

Hand Held Metal Slotting And Grooving Machine Rental

It is the operation of finishing a drilled hole to an accurate dimension with the help of reamer as a tool. The reamer is held on the tail stock spindle.

MAB 825 KTS Portable Milling Machine and Drill

Tapering

CS Unitec's MAB 825 KTS Portable Magnetic Milling Machine is ideal for fabricating-(slotting, keyhole, gauge insets, etc) steel engineering, and more. Available with multi-axis x ,y positioning this drill can be utilized for many milling, slotting and drilling applications. This versatile tool is a great addition to any fabricators arsenal. For End Mills up to 5/8' dia., Drill up to 3-1/8' dia., Tap up to 1-3/16' dia. Twist drill and ream up to 1-1/4' dia. 10' stroke length.

Learn more about CS Unitec's MAB 825 KTS Portable Milling Machine and Drill's specific benefits.

Equipped with an adjustable X,Y table, reversible, 4-gear, variable-speed, 16-Amp motor, the MAB 825 KTS is designed for continuous use and is great for milling, tapping, twist drilling, reaming and countersinking. Offers a magnetic holding force of 6,600 lbs. on 1' plate. Equipped with automatic internal lubrication, plus advanced safety features such as an electronic safety shutoff sensor, emergency-off function and magnetic force indicator.

Contact us for more information:

Hand Held Metal Slotting And Grooving Machine For Sale

USA/Canada: 1-800-700-5919
International: 1-203-853-9522

Hand Held Metal Slotting And Grooving Machines

If for any reason, you are not able to see the video hosted on YouTube, please contact us.

Hand Held Metal Slotting And Grooving Machine Parts

Go back to the video center.